Black banner

7295 Electric Rope Shovel

One of our mid-range shovels, the Cat 7295 provides proven Cat AC IGBT electronics and a robust front end design. The 7295 provides a 50-ton (45-tonne) payload, plus three- and four-pass loading capability with the Cat 785 ,789 and 793 mining trucks for an optimal loading and hauling operation.

Dimensions

Dipper Payload

50t

Dipper Capacity

19.1-38.2 m3 (25-50 yd3)

Note

Dependent on application and material density.

Weights

Working Weight - With Dipper and Standard Links

1748837lb

Ballast - Furnished By Customer

352000lb

Note (1)

These weights will vary slightly depending upon dipper and optional equipment selection.

Note (2)

All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

Front End

Standard Rope Data - Boom Suspension - Diameter

2.75in

Components

One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

Standard Rope Data - Retract - No.

1

Standard Rope Data - Hoist - Diameter

2.375in

Standard Rope Data - Crowd - Diameter

2.25in

Standard Rope Data - Dipper Trip - No.

1

Crowd

Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Standard Rope Data - Hoist - No.

2

Standard Rope Data - Retract - Diameter

2.25in

Standard Rope Data - Dipper Trip - Diameter

0.625in

Standard Rope Data - Boom Suspension - No.

4

Standard Rope Data - Crowd - No.

1

Note

High impact ropes available as an option

Main Structures

Ground Bearing Pressure

Ground bearing pressure is dependent upon many factors.

Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard

28.22in

Ground Bearing Pressure - 182.9 cm (72 in) Treads

39in

Upper Works Overall Width - Including Standard Walkways

41.33in

Planetary Propel

Dual-motor independent drive.

Swing

Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.

Ground Bearing Pressure - Total Effective Bearing Area

315.6ft²

Hoist

A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.

Optimal Working Ranges*

Dumping Height - With Clearance to Open Dipper Door

27.56ft

Cutting Radius - Maximum

67.59ft

Revolving Frame Tail Swing Radius

25.59in

Radius of Level Floor

48.88ft

Cutting Height - Maximum

45ft

Note (1)

Optimal working ranges based on loading a Cat® 785D truck.

Note (2)

*All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

Lube System

Type

Automatic, single-line system for open gear lubricant and grease.

Components (1)

6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.

Components (2)

External fast fill from lower level.

Electrical

Power Requirements - 60 Hz

4,160V, 7,200V

Power Requirements - Peak power

2886HP

Drive

IGBT Acutrol drive system.

Power Requirements - Voltage

3 phase, 50/60 Hz, 7,200V

Power Requirements - 50 Hz

6,000V, 6,600V, 7,200V

Power Requirements - Average Power Demand

538-753 kW (721-1,010 hp)

Note

Other voltages available to suit customer requirements.

Standard Equipment:

Optional Equipment:

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.