Black banner

Dimensions

Dipper Payload

70t

Dipper Capacity

20.6-55.8 m3 (27-73 yd3)

Note

Dependent on application and material density.

Weights

Working Weight - With Dipper and Standard Links

2652000lb

Ballast - Furnished By Customer

574000lb

Note (1)

These weights will vary slightly depending upon dipper and optional equipment selection.

Note (2)

All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Main Structures

Ground Bearing Pressure - 274.3 cm (108 in) Treads

43psi

Planetary Propel

Dual-motor independent drive.

Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard

32.75ft

Ground Bearing Pressure - Total Effective Bearing Area (2)

442ft²

Ground Bearing Pressure

Ground bearing pressure is dependent upon many factors.

Ground Bearing Pressure - Total Effective Bearing Area (1)

343ft²

Upper Works Overall Width - Including Standard Walkways

44.25ft

Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads

34.75ft

Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard

54psi

Swing

Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.

Hoist

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Optimal Working Ranges*

Cutting Height - Maximum

48.75ft

Dumping Height - With Clearance to Open Dipper Door

30.84ft

Cutting Radius - Maximum

74.75ft

Radius of Level Floor

52.49ft

Revolving Frame Tail Swing Radius

30.51ft

Note (1)

Optimal working ranges based on loading a Cat® 793F truck.

Note (2)

*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Lube System

Type

Automatic, single-line system for open gear lubricant and grease.

Components (1)

6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.

Components (2)

External fast fill from lower level.

Electrical

Drive

IGBT Acutrol drive system.

Power Requirements - Peak power

4165HP

Power Requirements - Voltage

3 phase, 50/60 Hz, 7,200V

Power Requirements - Average Power Demand

777-1087 kW (1,042-1,458 hp)

Power Requirements - 60 Hz

7,200V

Power Requirements - 50 Hz

6,000V, 6,600V, 7,200V, 11,000V

Note

Other voltages available to suit customer requirements.

Front End

Rope Data - Crowd - Diameter

2.5in

Rope Data - Dipper Trip - Diameter

0.625in

Rope Data - Hoist - Diameter

2.75in

Rope Data - Boom Suspension - Diameter

3.25in

Rope Data - Crowd - No.

1

Rope Data - Retract - No.

1

Rope Data - Dipper Trip - No.

1

Components

One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

Rope Data - Boom Suspension - No.

4

Crowd

Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Rope Data - Hoist - No.

2

Rope Data - Retract - Diameter

2.5in

Note

High impact ropes available as an option

Standard Equipment:

Optional Equipment:

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.