7495 HF Electric Rope Shovel

Electric rope shovels have been successfully removing overburden and ore on mine sites around the world for more than a century. Driven by a vision to make these highly productive machines safer, more reliable and even more productive, we challenged the status quo and built an electric rope shovel that’s better.

Share Print Download PDF View Rental Options Apply For Credit

Dimensions

Dipper Payload

120t

Dipper Capacity

30.6-62.7 m3 (40-82 yd3)

Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)

120t

Note

Dependent on application and material density

Weights

Working Weight - With Dipper and Standard Links

3164000lb

Ballast - Furnished By Customer

667150lb

Note (1)

These weights will vary slightly depending upon dipper and optional equipment selection

Note (2)

All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers.

Main Structures

Planetary Propel

Dual-motor independent drive

Swing

Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.

Crawler Dimensions - Overall Width 317.5 cm (125 in) Treads

41.67in

Hoist

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Ground Bearing Pressure - Note

Ground bearing pressure is dependent upon many factors

Upper Works Overall Width - Including Standard Walkways

41.99in

Ground Bearing Pressure - Total Effective Bearing Area (317.5 cm/125 in) Treads

57 m2 (248 kPa); 614 ft2 (36 psi)

Lube System

Type

Automatic, single-line system for open gear lubricant and grease

Components (1)

Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room

Components (2)

External fast fill from lower level

Electrical

Drive

IGBT Acutrol drive system

System Voltage - Nominal

50/60 Hz, 7,200V

Power Requirements - Voltage

3 phase, 50/60 Hz, 7,200V

Note

Other voltage options available to suit customer requirements

Power Requirements - 50 Hz

6,000V, 6,600V, 7,200V, 11,000V

Power Requirements - 60 Hz

7,200V, 13,800V

Power Requirements - Peak power

3778 kW

Power Requirements - Average Power Demand

945-1322 kW

Front End

Rope Data - Note

High impact ropes available as an option

Rope Data - Hoist - No.

Rope Data - Hoist - Diameter

2.75in

Rope Data - Dipper Trip - No.

Rope Data - Boom Suspension - Diameter

3.25in

Components

One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

Rope Data - Dipper Trip - Diameter

0.75in

Rope Data - Boom Suspension - No.

Crowd (1)

HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.

Crowd (2)

(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Dimensions - Working Ranges

Operating Weight

3164000lb

Dipper Payload

120ton (US)

Maximum Dumping Height

29.53ft

Dipper Capacities

30.6-62.7 m3 (40-82 yd3)

Dimensions (Approximate) - Optimal Working Ranges*

Radius of Level Floor

55.77ft

Cutting Height - Maximum

55ft

Dumping Height - With Clearance to Open Dipper Door

29.53ft

Revolving Frame Tail Swing Radius

30.51ft

Cutting Radius - Maximum

79.72ft

Note (1)

Optimal working ranges based on loading a Cat 797F truck.

Note (2)

*All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers.

Standard Equipment:

Optional Equipment:

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

Make

Model Number

First Name*

Last Name*

Business Name*

Email Address*

Phone Number*

Address*

City*

State*

Zip*

Comments

true I agree to all the terms and conditions

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.