995 Wheel Loader
Built to the same size as the 994K but offering a higher rated payload, the new Cat® 995 Wheel Loader gives you greater productivity and performance while using less fuel. It offers a one-pass reduction when loading Cat 785, 789 and 793 Mining Trucks — increasing production and efficiency up to 33% when loading the 785, up to 25% when loading the 789, and up to 20% with the 793. The 995 demonstrates 21% higher efficiency and 24% more production than the 994K in equal operating mode thanks to a higher rated payload and 6% increase in hydraulic force. In Enhanced Eco Mode, the 995 demonstrates up to a 30% increase in efficiency and an 11% reduction in hourly fuel consumption versus the 994K in throttle lock mode, which translates to 23% less CO2 per unit of material moved. It also offers a more comfortable operator environment and is infused with new technology features that allow additional gains in efficiency.
Engine
Engine Model
Emissions
Engine Power - ISO 14396
Gross Power - SAE J1995
Net Power - SAE J1349 - Standard Ambient
Net Power - SAE J1349 - High Ambient
Bore
Stroke
Displacement
Peak Torque - 1,200 rpm - SAE J1995
Torque Rise
Note (1)
Note (2)
Note (3)
Operating Specifications
Operating Weight - Standard
Bucket Capacity Range
Operating Weight - High Lift
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
Rated Payload - Standard Lift (Moderate to High Digging Resistance)
Rated Payload - High Lift (Low to Moderate Digging Resistance)
Rated Payload - High Lift (Moderate to High Digging Resistance)
Note
Cat Truck Match - Standard
Cat Truck Match - High Lift
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift
Clearance at Maximum Lift
Dump Angle at Maximum Lift
Front Axle Centerline to Bucket Tip
Ground to Bumper Clearance
Ground to Center of Axles
Ground to Lower Hitch Clearance
Ground to Top of Exhaust Stacks
Ground to Top of Hood
Ground to Top of ROPS
Maximum Overall Height - Bucket Raised
Maximum Overall Length
Note
Rack Angle at Maximum Lift
Rack Back Angle - Carry
Rack Back Angle - Ground Level
Reach - Maximum Lift
Rear Axle - Centerline to Bumper
Tread Width
Wheel Base
Width - Over Tires - With Bulge
Transmission
Transmission Type
Forward - 1
Forward - 2
Forward - 3
Reverse - 1
Reverse - 2
Reverse - 3
Direct Drive - Forward 1
Direct Drive - Forward 2
Direct Drive - Forward 3
Direct Drive - Reverse 1
Direct Drive - Reverse 2
Direct Drive - Reverse 3
Note
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Lift/Tilt System - Pump
Maximum Flow at 1,700 rpm Engine Speed
Relief Valve Setting - Lift/Tilt
Cylinders, Double Acting - Lift, Bore and Stroke
Cylinders, Double Acting - Tilt, Bore and Stroke
Pilot System
Hydraulic Cycle Times
Rack Back
Raise
Dump
Lower Float Down
Complete System Fill
Fuel Tank - Standard
Fuel Tank - With 24 hr Attachment
Cooling System
Engine Crankcase
Transmission
Differential - Final Drives - Front
Differential - Final Drives - Rear
Hydraulic Tank - Implement and Hydraulic Fan
Hydraulic Tank - Steering and Braking
Oil Renewal System (ORS)*
Note
Axles
Front
Rear
Oscillation Angle
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
Machine Sound Level (ISO 6395:2008)
Note
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
Machine Sound Level (ISO 6395:2008)
Note
Hydraulic System - Steering
Steering System - Circuit
Steering System - Pump
Total Steering Angle
Steering Cycle Times - Low Idle
Steering Cycle Times - High Idle
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift
Clearance at Maximum Lift
Dump Angle at Maximum Lift
Front Axle Centerline to Bucket Tip
Ground to Bumper Clearance
Ground to Center of Axles
Ground to Lower Hitch Clearance
Ground to Top of Exhaust Stacks
Ground to Top of Hood
Ground to Top of ROPS
Maximum Overall Height - Bucket Raised
Maximum Overall Length
Note
Rack Angle at Maximum Lift
Rack Back Angle - Carry
Rack Back Angle - Ground Level
Reach - Maximum Lift
Rear Axle - Centerline to Bumper
Tread Width
Wheel Base
Width - Over Tires - With Bulge
Brakes
Brakes
Standard Equipment:
-
- Power Train
-
- Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
- Engine prelube
- Fuel priming pump (electric)
- Ground-level engine shutoff
- Engine air intake (above hood) precleaner
- Aluminum Modular Radiator (AMR)
- Automatic, ether starting aid
- Electronic throttle lock
- Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
- Rimpull control system
- Planetary powershift, 3F/3R electronic control transmission
- Delayed engine shutdown
- Oil-cooled, multi-disc, service brakes
- Electro-hydraulic parking brake
-
- Linkage
-
- Standard lift
-
- Electrical
-
- Alternator
- Batteries, low maintenance
- 10/15 amp, 24V to 12V converter
- Disconnect switch to bumper
- LED warning lights (pattern selectable)
- LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
- Emergency jump-start receptacle
- Starter and transmission lockout in bumper
- 24V starting and charging system
- Electric starters
-
- Operator Environment
-
- Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
- Bonded glass, tinted
- Trainer seat
- Dual-lever lift and tilt function controls
- Implement kickouts
- Air conditioner
- Cab pressure indicator
- Graphical touchscreen information display conveys real-time operating information
- Heater, defroster, auto temperature controls
- Powered cab precleaner
- Operator presence status
- Starting/charging system malfunction
- Electronic OMM
- Operator controls help
- Two USB charging ports
- CB mounting, 12V/24V power and antenna
- 14-pin service port
- 12V power
- Selectable application profiles
- Entertainment radio mute
- Push-To-Start (PTS)
- Warning/indicator instrumentation
- Keypad control with indicator lights
- Dome light in cab
- Lunchbox and beverage holders
- Electro-hydraulic force feedback steering
- Vital Information Management System (VIMS™) with information display: external data port, cycle timer
- Coat hook
- Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
-
- Safety
-
- Ground-access ladders
- Rear-vision camera
- Front frame access with steps
- Front walkway around cab
- Pump bay access ladders with T-handle and platform
- Tie-offs on ROPS and radiator guards
- Steering frame lock
- Stairways on both sides of the machine
- LED stairway and access lights
- Toe kicks
- Electric (field and shop) horns
- Retractable seatbelt, 76 mm (3 in) wide
- Trainer seat with lap belt, 76 mm (3 in) wide
- Back-up alarm
- Secondary steering
-
- Machine Control And Guidance
-
- MineStar™ Health ready
- MineStar GUIDE ready
- MineStar Edge ready
-
- Fuel Tank
-
- 12 hour (3240 L/856 gal)
-
- Cooling
-
- Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
-
- Ground-level Service Center
-
- Service center light
- Implement and cooling fan oil level indicator
- Steering and brake oil level indicator
- Window washer solvent level indicator
- Transmission oil level indicator
- DEF level indicator (if equipped)
- Fuel level indicator
- Engine oil level indicator
- Engine coolant level indicator
- Automatic lubrication system grease tank level indicator
- DEF purge indicator lamp
- Transmission lockout and LED
- Starter lockout and LED
- Heavy-duty battery disconnect switch
- Stairway light switch
- Service lighting switch (if equipped)
- Fuel shutoff engine shutdown switch
- Engine oil fast-fill port
- Transmission oil fast-fill port
- Steering and brake hydraulic oil fast-fill port
- Steering and brake hydraulic oil drain port
- Oil renewal system fast-fill port (if equipped)
- Engine coolant fast-fill port
- DEF fill port (HRC only)
- Implement and cooling fan hydraulic oil fast-fill port
- Implement and cooling hydraulic oil drain port
- Automatic lubrication system grease tank fill port
- 24V jump-start receptacle
- 240V jacket water and engine oil heater plug (if equipped)
- 12V power port
- VIMS key switch
- 14-pin machine data port
-
- Service
-
- EH steering eliminates need for neutralizer adjustment
- In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
- High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
- Pump efficiency monitoring
- Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
- Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
- Rock guards on linkage grease lines
- Cat O-ring face seal couplings
- Lockable service access doors
- Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
- High-speed engine oil change system
- Ground-level fast-fill fuel system
- Transmission guard
- Drawbar hitch with pin
- Cat XT™ hoses
- Left-side service center
- Oil sampling valves
- Automatic Autolube filling shutoff valve
- Telematics and Cat Electronic Technician service port in bumper
- Air filter remaining useful life sensor
- Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Load-sensing steering
- Supplemental steering system
- Vandalism protection caplocks
- Cooling cleanout service package
- VIMS download and Cat Electronic Technician service port in bumper
- Service lights (engine bay, service center)
- EH steering eliminates need for neutralizer adjustment
-
- Efficiency
-
- On demand throttle, HP Plus, and Enhanced ECO Modes
- Variable displacement implement pumps
- Variable displacement load sensing steering
- Variable displacement cooling fan pump
- Torque converter lock-up clutch
Optional Equipment:
-
- Power Train
-
- Oil Renewal System (ORS)* (for increased time between oil changes)
-
- Linkage
-
- High lift
-
- Operator Environment
-
- Rubber-mounted, high-impact resistant solar control glass
- Trainer seat with suspension
- Joystick lift and tilt function controls
- Bluetooth®-enabled machine security
- Sun screen, pull down (front and rear)
- AM/FM/AUX radio
- AM/FM/AUX/USB/BT/CD/SAT radio
-
- Safety
-
- Powered ground-access stairs
- Cat Detect (Rear Object Detection)
- Wheel chocks
-
- Cold Weather
-
- Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
- Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
- 240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Heated mirrors (recommended for below-freezing temperatures)
-
- Machine Control And Guidance
-
- Cat Payload with Overload Prevention
- New Autodig Components:
– Tire slip prevention
– Lift stall prevention
– Tire set - Operator coaching
-
- Fuel Tank
-
- 24 hour (5350 L/1414 gal)
-
- Cooling
-
- High ambient package (recommended for site conditions that do not exceed 53° C [127° F])
-
- Rims And Tires
-
- Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
- Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
- Tires – 58/85-57 84PR L4 (require 47" rims)
-
- Spare Rims
-
- 1194 mm (47") 152 mm (44 × 57) (6") flange
- 1194 mm (47") 127 mm (47 × 57) (5") flange
-
- Service
-
- Product Link™ satellite
- Product Link cellular
- Product Link (dual mode – satellite/cellular)
- Additional service lights (pump bay, front frame and bumper)
-
- Sound
-
- Sound-suppression package
Contact Us
Get A Quote
Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.