Black banner

Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)

Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)

Power Rating

Power Range

1000-1450 bhp (746-1081 bKW)

Clean Emissions Module (CEM) - Dimensions

6 Brick Z-Flow - Length

147.7in

6 Brick Z-Flow - Height

23.5in

6 Brick Z-Flow - Width

43.5in

6 Brick Z-Flow - Weight

1246lb

6 Brick U-Flow - Length

85in

6 Brick U-Flow - Height

23.5in

6 Brick U-Flow - Width

56.9in

6 Brick U-Flow - Weight

1235lb

Dosing Cabinet - Length

37.4in

Dosing Cabinet - Height

22.8in

Dosing Cabinet - Width

18.8in

Dosing Cabinet - Weight

209lb

Dimensions & Weights

Minimum Length

83.9in

Maximum Length

89.8in

Minimum Height

59.3in

Maximum Height

63.5in

Minimum Width

57.1in

Maximum Width

57.3in

Minimum Engine Dry Weight

6950lb

Maximum Engine Dry Weight

7160lb

Engine Specifications

Speed Range

1600-2150 rpm

Emissions

U.S. EPA Tier 4 Final certified IMO III emissions certified (SCR required)

Configuration

Vee 12, 4-stroke-cycle diesel

Bore

5.71in

Stroke

6.38in

Displacement

1959in³

Aspiration

Turbocharged-aftercooled aspiration

Governor

Electronic (A5 ECM)

Refill Capacity

Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan

Oil Change Interval

1000 hrs - deep pan

Cooling

Heat exchanger or keel cooled

Flywheel Housing

SAE No. 0 with SAE No. 18 flywheel (136 teeth)

Rotation

Counterclockwise from flywheel end

Standard Equipment:

  • Fuel System
    • Shipped loose primary fuel filter with water separator
    • Duplex fuel filters with hybrid fuel lines
    • Fuel transfer and priming pump
  • Air Inlet System
    • Air cleaner
    • Separate circuit aftercooled (SCAC)
  • Control System
    • 24V control system
  • Cooling System
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • Lube System
    • Oil fill, simplex filter and dipstick
    • Deep or shallow sump oil pan
  • Mounting System
    • Adjustable front support mounting system
  • General
    • Right or left hand service sides
    • Customer wiring and service tool connector

Optional Equipment:

  • Air Inlet System
    • Closed crankcase fumes disposal
  • Alarm And Protection
    • MECP I control panel
    • MECP III B control panel with Cat® Alarm and Protection System
  • Charging System
    • Charging alternator
  • Fuel System
    • Manual or electric fuel priming pump
    • Fuel cooler
  • Lube System
    • Duplex oil filters
  • Power Take-offs
    • Front drives including stub shaft and pump drive
    • Rear SAE A or B pump drives
  • Starting System
    • Starting motors – air, electric or dual

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.