C7.1 (Electronic Control System)

Share Print Download PDF Apply For Credit

Power Rating

Power Range

100 - 200 ekW

Generator Set Specifications

Frequency

50 / 60

Speed

1500 rpm / 1800 rpm

Engine Specifications

Emissions

IMO II, IMO III (SCR required) U.S. EPA Tier 3, EU Stage V, China II

Configuration

Inline 6, 4-Stroke Cycle Diesel

Displacement

428in³

Aspiration

Turbocharged / Aftercooled

Governor

Electronic (A5 ECM)

Bore

4.13in

Stroke

5.31in

Refill Capacity

Lube Oil System w/oil filter change: 21 L / 5.6 gal

Oil Change Interval

500 hrs

Rotation from Flywheel End

Counterclockwise

Cooling

Heat exchanger, Seperate Circuit Keel Cooled, Combined Circuit Keel Cooled, Radiator Cooled

Generator Set Dimensions

Length

76.3 in /1,940 mm

Height

49.7 in / 1,263 mm

Engine Dry Weight

3355 lb / 1,522 kg

Generator Set Dimensions and Weights - Dependent on Generator Type

Width

38.0 in / 965 mm

Standard Equipment:

Mounting System
- Front and rear engine mounting brackets
Exhaust System
- Watercooled turbocharger and exhaust manifold
Fuel System
- Common Rail fuel system
- Electric fuel priming pump
General
- Self-tensioning multi-vee belt drive
- Vibration damper and guard
Lube System
- Open crankcase ventilation system
- Integral engine oil cooler
Starting System
- 12 V or 24 V starter motor
Cooling System
- Gear-driven jacket-water pump
- Corrosion resistant sea water aftercooler
- Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
- Fuel cooler

Optional Equipment:

Lube System
- Transmission gear oil cooler (engine mounted)
- Left-hand and right-hand oil dipsticks
Fuel System
- SOLAS double wall high pressure fuel lines kit
General
- Glow plugs
Protection System
- Additional engine and transmission sensor packages for on or off vessel monitoring
Cooling System
- Cabin heater (calorifier) connections
- Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
- Jacket water heater
Air Inlet System
- Various 6" water cooled exhaust elbow configurations
Starting System
- Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

Make

Model Number

First Name*

Last Name*

Business Name*

Email Address*

Phone Number*

Address*

City*

State*

Zip*

Comments

true I agree to all the terms and conditions

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.