950M Wheel Loader | Front Loader | Tier 4
The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine deliversthe reliability, durability, and versatility you’ve come to expect from a Cat machine.
Engine
Net Power - ISO 9249
Emissions
Maximum Power - 2,100 rpm - ISO 14396
Peak Gross Torque - 1,300 rpm - SAE J1995
Maximum Net Power - 2,100 rpm - ISO 9249 - Metric
Maximum Power - 2,100 rpm - SAE J1995
Note
Maximum Net Power - 2,100 rpm - ISO 9249
Peak Gross Torque - 1,300 rpm - ISO 14396
Displacement
Maximum Net Power - 2,100 rpm - SAE J1349
Engine Model
Maximum Power - 2,100 rpm - ISO 14396 - Metric
Maximum Net Torque - 1,300 rpm
Weights
Operating Weight
Note
Buckets
Bucket Capacities
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
Height - Top of Hood
Note
Centerline of Rear Axle to Hitch
Overall Length - Without Bucket
Hinge Pin Height at Maximum Lift
Rack Back - Carry Height
Rack Back - Maximum Lift
Height - Top of Exhaust Pipe
Maximum Width - Over Tires - Loaded
Lift Arm Clearance at Maximum Lift
Ground Clearance
Hinge Pin Height at Carry Height
Wheel Base
Tread Width
Rack Back at Ground
Height - Top of ROPS
Operating Specifications
Note (1)
Static Tipping Load - Full 40° Turn - With Tire Deflection
Breakout Force
Static Tipping Load - Full 40° Turn - No Tire Deflection
Note (2)
Hydraulic System
Implement Pump Type
Implement System - Maximum Pump Output at 2,150 rpm
Implement System - Maximum Operating Pressure
Hydraulic Cycle Time - Total
Dimensions
Overall Length (without bucket)
Maximum Width over Tires (loaded)
Tread Width
Height - Top of ROPS
Height - Top of Hood
Height - Top of Exhaust Pipe
Hinge Pin Height at Carry Height
Hinge Pin Height at Maximum Lift
Ground Clearance
Centerline of Rear Axle to Edge of Counterweight
Centerline of Rear Axle to Hitch
Note
Wheel Base
Transmission
Forward - 2
Forward - 1
Forward - 5
Note
Reverse - 3
Forward - 4
Forward - 3
Reverse - 2
Reverse - 1
Service Refill Capacities
Fuel Tank
Differential - Final Drives - Front
Cooling System
Hydraulic Tank
Transmission
Differential - Final Drives - Rear
DEF Tank
Crankcase
Dimensions - High Lift
Height - Top of Hood
Hinge Pin Height at Carry Height
Height - Top of ROPS
Lift Arm Clearance at Maximum Lift
Centerline of Rear Axle to Hitch
Hinge Pin Height at Maximum Lift
Rack Back - Carry Height
Ground Clearance
Centerline of Rear Axle to Edge of Counterweight
Overall Length - Without Bucket
Note
Maximum Width - Over Tires - Loaded
Tread Width
Rack Back at Ground
Rack Back - Maximum Lift
Wheel Base
Height - Top of Exhaust Pipe
Sound
Note (1)
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
Note (2)
Note (3)
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
Engine - Tier 4 Final/Stage IV
Emissions
Bucket Capacities
Bucket Range
Standard Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Engine, Cat C7.1 meets Stage IV emission standards
- Cat Clean Emissions Module (CEM) with Diesel Particulate Filter (DPF) and Diesel Exhaust Fluid (DEF) tank and pump
- Fuel priming pump (electric)
- Fuel/water separator
- Precleaner, engine air intake
- Economy Mode (selectable)
- Transmission, automatic countershaft power shift (5F/3R)
- Torque converter, locking clutch with free wheel stator
- Switch, transmission neutralizer lockout
- Axles, manually actuated differential lock fron taxle, open differential rear axle
- Axles, ecology drains
- Brakes, full hydraulic enclosed wet-disc with Integrated Braking Systen (IBS)
- Brake wear indicators
- Parking brake, disc and caliper
- Fan, radiator, electronically controlled, hydraulically driven, temperature sensing, on demand
- Radiator, high debris with wide fin spacing
-
- Operator Environment
-
- Cab, pressureized and sound suppressed (ROPS/FOPS)
- Viscous mounts
- Multi-funtion 18 cm color LCD touch-screen display for rear vision camera image display (reverse travel activated) and machine status, setting and health parameters
- EH controls, SAL (single axis lever) lift and tilt function
- Steering, steering wheel
- Radio ready (entertainment) includes antenna, speakers and converter (12V, 10-amp)
- Air conditioner, heater, and defroster (auto temp and fan)
- EH parking brake
- Beverage holders (2) with storage compartment for cell phone/MP3 player
- Bucket/work tool function lockout
- Coat hook (2)
- Cab air filter
- Ergonomic cab access ladders and handrails
- Horn, electric
- Light, two dome (cab)
- Mirrors, rearview external with integrated spot mirrors
- Post mounted membrane 16 switch keypad
- 2 receptables, 12V
- Seat, Cat Comfort (cloth) air suspension
- Seat belt, 51 mm retractable, with indicator
- Sun visor, front
- Wet-arm wipers/washers front and rear, intermittent front wiper
- Window, sliding (left and right sides)
- Cab tie-off
-
- Computerized Monitoring System
-
- With following gauges: Speedometer/tachometer; Digital gear range indicator; Diesel Exhaust Fluid (DEF) level; Temperature: engine coolant, hydraulic oil, transmission oil; Fuel level
- With following warning indicators: Temperature: axle oil, engine intake manifold; Pressure: engine oil, fuel pressure hi/low, primary steering oil, service brake oil; Battery voltage hi/low; Engine air filter restriction; Hydraulic oil filter restriction; Hydraulic oil low; Parking brake; DEF low level; Transmission filter bypass
-
- Electrical And Lighting
-
- Batteries (2), maintenance free 1,400 CCA
- Ignition key; start/stop switch
- Starter, electric, heavy duty
- Starting and charging system (24V)
- Lighting system: Four halogen work lights (cab mounted); Two LED stop, turn, tail lights; Two halogen roading lights (with signals); Two halogen rear vision lights (hood mounted)
- Alarm, back-up
- Alternator, 145-amp brushed
- Main disconnect switch
- Receptacle start (cables not included)
- Secondary steering
-
- Cat Connect Technologies
-
- Link technologies: Product Link
- Detect technologies: rear vision camera
-
- Linkage
-
- Linkage, optimized Z-bar, cast crosstube/tilt lever
- Kickout, lift and tilt, automatic (adjustable in cab)
-
- Hydraulics
-
- Hydraulic system, load sensing
- Steering, load sensing
- Ride control, 2V
- Remote diagnostic pressure taps
- Hoses, Cat XT™
- Couplings, Cat O-ring face seal
- Hydraulic oil cooler (swing out)
- Oil sampling valves
-
- Fluids
-
- Premixed extended life coolant with freeze protection to -34° C
-
- Other Standard Equipment
-
- Hood, non-metallic power tilting
- Service centers (electrical and hydraulic)
- Auto idle shutdown
- Fenders with mud-flap/rear with extension
- Ecology drains for engine, transmission, and hydraulics
- Grill, airborne debris
- Filters: fuel, engine air, engine oil, hydraulic oil, transmission
- Fuel cooler
- Grease zerks
- Hitch, drawbar with pin
- Precleaner rain cap
- Sight gauges: engine coolant, hydraulic oil, and transmission oil level
- Toolbox
- Vandalism protection caplocks
Optional Equipment:
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Axles: Automatic front/rear differential locks; Axle oil cooler; Seal guards
- Fan, VPF (variable pitch fan), automatic and manual control
- Radiator, high debris with wider fin spacing
-
- Operator Environment
-
- Door, remote opening system
- Cover, HVAC metallic
- EH controls, joystick lift and tilt - Additional roller switch for 4th function
- EH controls, joystick lift and tilt - Additional integrated roller switched for 3rd and 4th functions
- Filter, carbon fresh air
- Mirrors, heated rearview external with integrated spot mirrors
- Precleaner, HVAC
- Precleaner, HVAC (RESPA)
- Radio, AM/FM/CD/USB/MP3 Bluetooth with Satellite Sirius and XM
- Radio, CB ready
- Seat, heated air suspension
- Seat belt, 76 mm (3 in) retractable, with indicator
- Steering, EH wheel with directional FNR shifter and gear selector - Additional FNR with implement controls
- Roof, metallic
- Steering, secondary
- Sun visor, rear
- Windows, rubber mounted
- Windows, with front guard
- Windows, with heavy duty front guard
- Windows, with full guards front, rear and sides
-
- Electrical And Lighting
-
- Four additional auxiliary halogen cab mounted work lights or
- Two additional auxiliary front HI LED and two additional auxiliary rear LED cab mounted work lights with 2 LED work lights in the radiator grill and LED front turn signals also includes replacement of the standard four halogen cab mounted work lights with four LED work lights (standard offering and only roading light available is the halogen roading light)
- Warning amber strobe beacon
- Reversing strobes
- External seat belt indicator light
- Speed limiter - 20 km/h (Europe only)
-
- Starters, Batteries, And Alternators
-
- Cold start - 120V
- Cold start - 240V
-
- Cat Connect Technologies
-
- Link technologies: VIMS™
- Payload technologies: Advanced Productivity subscription; Cat Production Measurement 2.0; Printer; Aggregate Autodig
- Detect technologies: Cat Rear Object Detection
- Machine Security System
-
- Work Tools
-
- Fusion quick coupler
- Performance Series buckets
- Millyard forks
- Grapple forks
- Logging forks
- Log and lumber forks
- Pallet forks
- Millyard pole forks
- Woodchip buckets
- High dump buckets
-
- Hydraulics
-
- 3rd function with Ride Control
- 4th function with Ride Control
-
- Fluids
-
- Premixed extended life coolant with freeze protection to -50° C (-58° F)
-
- Other Optional Equipment
-
- Cat Autolube System
- Fenders, roading
- Guard, power train
- Oil change, high speed engine
- Precleaner, turbine
- Precleaner, trash
- Wheel chocks
- Low profile tires
- Auto idle shutdown
-
- Purpose Built Specialty Models
-
- Industrial & Waste
- Forestry
- Corrosion Resistance
Contact Us
Get A Quote
Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.