Black banner

TL642 Telehandler

The TL642 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Operating Specifications

Rated Load Capacity

6500lb

Maximum Lift Height

42ft

Maximum Forward Reach

30ft

Top Travel Speed

19mile/h

Drawbar Pull - Loaded

20670lbf

Turning Radius - Over Tires

12ft

Frame Leveling

10°

Capacity at Maximum Height

6500lb

Capacity at Maximum Reach

700lb

Engine

Engine Model

Cat® C3.6L

Gross Power - Basic

73.7HP

Note

Meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight

22002lb

Dimensions

Height

8ft

Width

8ft

Wheel Base

11.25ft

Length - Fork Face

18.5ft

Ground Clearance

17in

Turning Radius - Over Tires

12ft

Tires

Standard

370/75-28 Duraforce Air

Optional (1)

370/75-28 Duraforce Foam Fill

Optional (2)

315/95-28 Telemaster Solid

Optional (3)

13.00-24 16PR Air

Optional (4)

13.00-24 12PR Foam

Optional (5)

370/75-28 Non-Marking Air

Optional

370/75-28 Non-Marking Foam

Service Refill Capacities

Fuel Tank

38.3gal (US)

Hydraulic System

42gal (US)

Boom Performance

Boom Up

15s

Boom Down

10.3s

Tele In

9.5s

Tele Out

16.3s

Hydraulic System

Gear Pump

Single-section

Auxiliary Hydraulic Pressure

3481psi

Auxiliary Hydraulic Flow

18gal/min

Braking System

Parking Brakes

Wet disc, spring applied hydraulic release on front axle

Service Brakes

Inboard wet disc brakes on front and rear axles

Axles

Type (1)

Trunnion mounted planetary 55 degree steer axles.

Type (2)

High bias limited slip differential on front axle.

Work Tools

Carriages - Dual Fork Positioning

50in

Pallet Forks - Option 2

[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)

Pallet Forks - Option 3

[2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)

Pallet Forks - Option 1

[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)

Cubing Forks

[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)

Carriages - Standard Tilt

50in

Carriages - Side Shift

50in

Carriages - Swing

100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)

Lumber Forks - Option 1

[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)

Transmission Speeds

Forward

4 speed

Reverse

3 speed

Standard Equipment:

  • Telescopic Boom
    • Boom angle indicator
  • Electrical
    • Alternator, 60 amp, 12 volt
    • Battery, 12 volt, 1000 CCA
    • Horn
    • Alarm, backup
  • Operator Station
    • Canopy, ROPS/FOPS
    • Joystick, single electronic
    • Adjustable joystick wristrest
    • Low step, grab bars for easy entry
    • Seat - vinyl, suspension with Cat logo
    • Steering wheel spinner knob
    • Floor mat - heavy duty
    • Left side rear view mirror
    • Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
    • Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
    • Park Brake with indicator light
    • Steering Wheel with Cat logo
    • Cat keys and locks
    • Brakes - wet disc service
  • Power Train
    • Engine,Cat® C3.6L (73.7 hp)
    • Thermal starting aid
    • Transmission, 4-speed forward, 3-speed reverse
    • Cat filters, hoses and couplings
    • Axles - Dana
    • Steering - 4 wheel
    • Parking brake with indicator light
    • Drive - 4 wheel
  • Structure
    • Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
    • Cat IT Coupler
  • Anti-freeze
    • Coolant - Anti-freeze, 50/50 Mix
  • Tires
    • Tires - 370/75-28 Duraforce Air
  • Other Equipment
    • Integrated lift and tie down points
    • Standard Cat color paint
    • Auxillary hydraulics for auxillary attachments (one function)

Optional Equipment:

  • Telescopic Boom
    • Hydraulic IT Coupler (includes Auxiliary Electrics)
  • Electrical
    • Work Light Group: 2 Cab mounted headlights -- 2 forward, 1 rearward; 1 Reversing Light; 2 Boom Mounted Lights, 1 Rotating Beacon
    • Engine heater block
    • Heater - open cab
    • Road Light Group -- Headlights, Brake Lights, Turn Signals
  • Operator Station
    • Air conditioning
    • Auxiliary hydraulics for Hydraulic Work Tools (one function)
    • Single Joystick - with Rocker Switch
    • EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)
    • Skylight Wiper
    • Brick Guard - Top and front.
  • Tires
    • Tires - 13.00-24 12PR Foam
    • Tires - 13.00-24 16PR Air
    • Tires - 370/75-28 Duraforce Foam Fill
    • Tires - 370/75-28 Non-Marking Air
    • Tires - 315/95-28 Telemaster Solid
  • Other Equipment
    • Fenders
    • Tow Hook - Pintle Type
    • Instant Hook - 4000 lb capacity, boom head mounted winch
    • Outriggers
    • Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater.
  • Work Tools
    • Access Work Platform - 8 ft x 4 ft; 1,000 maximum capacity (available from factory)
    • Carriage - side shift, 50 in. (available from factory)
    • Lifting Hook - fork mounted (available from factory)
    • Truss Broom
    • Carriage - standard tilt, 50 in. (available from factory)
    • Carriage - wide tilt, 72 in. (available from factory)
    • Carriage - standard rotate, 50 in. (available from factory)
    • Carriage - swing, 72 in., 100 degrees, 6000 lb capacity, 5000 lb swung (available from factory)
    • Pallet Forks - two 60 in, 2 in x 6 in, capacity per pair 6600 lb (available from factory)
    • Pallet Forks - two 48 in, 2.36 in x 4 in, capacity per pair 6600 lb (available from factory)
    • Cubing Forks - two 48 in, 2 in x 2 in, capacity per pair 3800 lb (available from factory)
    • Bucket - General Purpose 1.3 Cu. Yd.
    • Bucket - Material Handling 1.95 Cu. Yd.
    • Bucket - Multi-Purpose, 1.3 Cu. Yd.

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.