Black banner

D3 Track-Type Tractor

The Cat® D3 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Engine

Engine Model

Cat® C3.6

Power - Net

104HP

Displacement

220in³

Net Power - 2,200 rpm - ISO 9249/EEC 80/1269

104HP

Note (1)

Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

Note (2)

All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Net Power - 2,200 rpm - SAE J1349

104HP

Weights

Operating Weight

20639.68lb

Operating Weight - LGP

21369lb

Operating Weight - LGP, 762 mm/30 in

21810lb

Note (2)

For machine with ripper, add 554 kg (1,222 lb).

Note (1)

Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Weights 

Operating Weight

20640lb

Transmission

Drive Pumps

1

Maximum Travel Speed - Forward

5.6mile/h

Maximum Travel Speed - Reverse

6.2mile/h

Track Motors

2

Relief Valve Settings

7033psi

Hydraulic Controls

Pump Output

17.2gal/min

Relief Valve Settings

2988psi

Ripper

Type

Parallelogram

Number of Shanks

3

Height

6.5in

Weight

1222lb

Maximum Digging Depth

13.3in

Maximum Reach - Ground Line

30.2in

Overall Width

67.3in

Maximum Ground Clearance Under Tip

17.6in

Dimensions

Length of Basic Dozer (without blade) - Standard

128.7in

Dozer Height - Standard

109in

Width of Dozer (standard shoes, no blade) - LGP

92.9in

Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)

103.5in

Length of Basic Dozer (without blade) - LGP

128.7in

Dozer Height - LGP, 762 mm (30 in)

109in

Width of Dozer (standard shoes, no blade) - Standard

83in

Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)

128.7in

Dozer Height - LGP

109in

BLADE: Blade Width - LGP

126.7in

Track Gauge - LGP, 762 mm (30 in)

73in

BLADE: Digging Depth - LGP

23.2in

Track Gauge - LGP

67.9in

BLADE: Blade Capacity (SAE) - LGP

3.06yd³

BLADE: Blade Width at Maximum Angle - LGP

115.8in

BLADE: Blade Cutting Edge Angle, Adjustable - LGP

52° to 58°

Ground Clearance - LGP, 762 mm (30 in)

13in

BLADE: Blade Height - LGP

39.8in

BLADE: Blade Lift Height - LGP

30.2in

Ground Clearance - LGP

13in

Note

With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)

Overall Length - With Blade - LGP, 762 mm (30 in)

169.6in

Overall Length - With Blade - LGP

169.6in

BLADE: Maximum Tilt - LGP

17.7in

BLADE: Maximum Angle (either side) - LGP

25°

Engine 

Power Train 

Hydrostatic

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level II

Undercarriage

Shoe Width - Standard

20in

Ground Pressure - LGP

4.5psi

Track Gauge - LGP

69in

Length - Track on Ground - LGP

91in

Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage

40

Ground Pressure - LGP, 762 mm (30 in)

3.9psi

Length - Track on Ground - LGP, 762 mm (30 in)

91in

Shoe Width - LGP

26in

Shoe Width - LGP, 762 mm (30 in)

30in

Track Gauge

63in

Number of Rollers - Each Side

7

Track Gauge - LGP, 762 mm (30 in)

73in

Undercarriage 

Ground Pressure 

5.7psi

Length of Track on Ground 

91in

Number of Shoes - Each Side - Abrasion Undercarriage 

36

Service Refill Capacities

Cooling System

5gal (US)

Final Drive - Each - LGP

2.6gal (US)

Crankcase - With Filter

2.8gal (US)

Transmission - Hydraulic Tank

23.8gal (US)

Fuel Tank

51.5gal (US)

Diesel Exhaust Fluid (DEF) Tank

4.9gal (US)

Service Refill Capacities 

Final Drives - Each Side 

2.6gal (US)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions 

BLADE: Blade Capacity (SAE) - Standard 

2.86yd³

Track Gauge - Standard 

63in

BLADE: Digging Depth - Standard 

23.8in

BLADE: Blade Lift Height - Standard 

30.2in

Ground Clearance - Standard 

13in

Overall Length - With Blade - Standard 

170.7in

BLADE: Blade Cutting Edge Angle, Adjustable - Standard 

52° to 58°

BLADE: Blade Height - Standard 

42.2in

BLADE: Maximum Tilt - Standard 

15.8in

Note 

Abrasion Undercarriage

BLADE: Blade Width - Standard 

109.5in

BLADE: Blade Width at Maximum Angle - Standard 

103.8in

BLADE: Maximum Angle (either side) - Standard 

25°

Retrieval Winch

Maximum Line Speed - Full Drum

79ft/min

Drum Capacity - Recommended Cable

277ft

Winch Drive

Hydraulic

Weight

1747lb

Maximum Line Pull - Full Drum

20350lb

Rope Diameter - Recommended

0.63in

Maximum Line Speed - Bare Drum

50ft/min

Speed

Variable

Winch Length

35.63in

Drum Diameter

8in

Overall width

27.91in

Drum Width

9.65in

Throat Clearance

5.6in

Maximum Line Pull - Bare Drum

32150lb

Control

Hydraulic

Rope Diameter - Optional

0.75in

Drum Capacity - Optional Cable

195ft

High Performance Winch

Winch length

27.76in

Rope diameter – optional

0.75in

Maximum line speed – bare drum

131ft/min

Maximum line pull – bare drum

40000lb

Weight

1345lb

Drum capacity – optional

256ft

Maximum line speed – full drum

207ft/min

Rope diameter – recommended

0.63in

Winch drive

Hydrostatic

Throat clearance

6.75in

Drum diameter

10in

Overall width

29.2in

Drum width

10.8in

Maximum line pull – full drum

25000lb

Speed

Variable

Drum capacity – recommended cable

371ft

Control

Hydraulic

Standard Equipment:

  • Power Train
    • Air cleaner with precleaner, automatic dust ejection and underhood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • Electrical
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • Undercarriage
    • SALT undercarriage (40 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Seven roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • Hydraulic
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • Cat Technology
    • Low Slip Traction Control (included with ARO and Cat Grade 3D)
    • Slope Indicate
    • Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
    • Compatibility with radios and base stations from Trimble, Topcon, and Leica
    • Capability to install 3D grade systems from Trimble, Topcon, and Leica
    • Cat Product Link PLE643/PLE743 Cellular
  • Operator Environment
    • Armrests, adjustable
    • Coat hook
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco Mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Diesel exhaust fluid (DEF)
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3")
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic

Optional Equipment:

  • Power Train
    • Air cleaner with external precleaner
    • Installation, winch
  • Electrical
    • Four integrated front LED lights, two rear LED
  • Undercarriage
    • Abrasion undercarriage (36 section)
    • Track Pairs
      – Track, 510 mm (20 in)
      – Track, 660 mm (26 in)
      – Track, 762 mm (30 in)
  • Hydraulic
    • Four valve for use with ripper
    • Four valve for use with winch
  • Cat Technology
    • Cat Grade with Slope Assist
    • Cat Grade with 3D
    • Blade Load Monitor (included with Cat Grade 3D)
    • AutoCarry (included with Cat Grade 3D)
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Full-color 10 in (254 mm) touchscreen grade display
    • Cat Command Console
    • Cat Command Station
  • Operator Environment
    • Power Pitch
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
  • Other
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.