Black banner

Cat® 3608 Industrial Diesel Engine

Cat® 3608 Industrial Diesel Engine

The Cat® 3608 Industrial Diesel Engine is offered in ratings ranging from 2080-2460 bkW (2787-3300 bhp) @ 800-1000 rpm. These ratings are non-certified rating and are available for global non-regulated areas. Industries powered by 3608 engines include Construction, Forestry, General Industrial, Material Handling and Mining.

Power Rating

Maximum Power

3300HP

Maximum Torque

18219lb-ft @ 820 rpm

Rated Speed

800-1000 rpm

Minimum Power

2787HP

Emission Standards

Emissions

Non-Certified

Engine Dimensions - Approximate

Length

190in

Width

69in

Height

103in

Weight - Net Dry - Basic Operating Engine Without Optional Attachments

41800lb

General

Engine Configuration

Inline 8, 4-Stroke-Cycle Diesel

Bore

11in

Stroke

11.8in

Displacement

9018in³

Aspiration

Turbocharged Aftercooled

Rotation from Flywheel End

Counterclockwise

Aftertreatment

-

Standard Equipment:

  • Air Inlet System
    • Aftercooler core, corrosion resistant coated (air side)
    • Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
    • Turbocharger, rear mounted
    • Jacket water aftercooled
  • Control System
    • Governor, RH, 3161 with self contained synthetic oil sump
    • Air-fuel ratio control
    • Mechanical speed control, without torque control
    • Governor control
    • Positive locking
  • Cooling System
    • Thermostats and housing
    • Jacket water pump, centrifugal
  • Exhaust System
    • Exhaust manifold, dry
  • Flywheels And Flywheel Housing
    • SAE No. 00 flywheel
    • 183 flywheel teeth
    • SAE No. 00 flywheel housing
  • Fuel System
    • Fuel filter, with service indicators, cartridge type with RH service
    • Fuel transfer pump
  • Instrumentation
    • Instrument Panel, RH
    • Engine oil pressure gauge
    • Fuel pressure gauge
    • Oil filter differential gauge
    • Jacket water temperature gauge
    • Service meter, electric
    • Tachometer
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler
    • Oil dipstick
    • Oil pump
    • Oil filter, cartridge type with RH service
    • Shallow oil pan
  • Mounting System
    • Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
  • Power Take Off
    • Accessory drive, upper RH
    • Front housing, single sided
  • Protection System
    • Junction box
    • Manual shutoff, RH
    • Safety shutoff protection, energized to shutdown
    • Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
    • Water temperature
    • Overspeed
    • 3161 governor solenoid energized to shutdown
  • Starting System
    • Starting switch
  • General
    • Vibration damper
    • Lifting eyes
    • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment:

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.