Black banner

D175 GC Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Generator Set Specifications

Maximum Rating

175 ekW

Minimum Rating

175 ekW

Emissions/Fuel Strategy

U.S. EPA Cert., Tier 3

Voltage

208 to 600 Volts

Frequency

60 Hz

Speed

1800 rpm

Duty Cycle

Standby

Engine Specifications

Engine Model

C7.1 I-6, 4-Cycle Diesel

Bore

4.1in

Stroke

5.31in

Displacement

427.8in³

Compression Ratio

16.7:1

Aspiration

Turbocharged, Air to Air Aftercooled

Fuel System

Electronic, Common Rail

Governor Type

ADEM™A4

Generator Set Dimensions

Length - Maximum

103.7in

Width - Maximum

51.2in

Height - Maximum

58.7in

Dry Weight - Genset (maximum)

3741lb

Standard Equipment:

  • Air Inlet System
    • Air cleaner; light duty with disposable element
  • Control Panels
    • GCCP 1.2 Control panel
  • Cooling System
    • Coolant drain line with valves
    • Fan drive, battery charging alternator drive
    • Caterpillar extended life coolant
    • Radiator and cooling fan with guards
  • Generator And Generator Attachments
    • Tower panel, IP22, bottom cable entry
    • IP23 Protection
    • 12 Leads
    • Circuit breaker, IEC, 3 pole, mounted in tower panel
    • Segregated low voltage (AC/DC) wiring panel
    • Voltage regulator (single phase sensing)
  • Exhaust System
    • Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
  • Fuel System
    • Base, formed steel with single wall integral 24-hour fuel tank
    • Standard open set fuel tank/base supplied
  • Lube System
    • Lubricating oil
    • Oil drain line with valve
  • Mounting System
    • Termination points for coolant and lube oil drain lines
    • Includes lifting provision and drag points
    • Captive linear vibration isolators between base and engine-generator
  • Starting / Charging System
    • 24V battery with rack and cables
  • Governing System
    • Mechanical and electrical governing system - model dependent
  • General
    • Engine and alternator pre-paint, Caterpillar yellow

Optional Equipment:

  • Alternator System
    • Permanent magnet excitation (PMG)
    • Quatrature droop king
    • Alternator removal
    • 3 Phase sensing
    • R Frame auxiliary winding: R2273L4 SE aux alt 07, aux alt 08 and aux alt 10
    • Anti-condensation heater
    • Optional LC Frame alternator with coastal insulation protection
  • Circuit Breakers
    • Padlockable breaker device
    • 4 Pole 250A, 400A and 630A Circuit breakers
  • Control Panel Options
    • Earth fault (2 wire only)
    • Speed adjust contacts
    • Panel mounted audible alarm
    • Volt free contacts
    • Earth leakage (2 wire only)
    • Overload shutdown via breaker
    • Control panel heater
    • Speed adjust potentiometer
    • Battery charger
    • Emergency stop with key
  • Control System
    • Static battery charger
    • Volt free contacts for common alarm
    • Volt free contacts for generator set running
    • GCCP 1.2
  • Cooling System
    • Low coolant temperature
    • Coolant heater
    • Low coolant level shutdown
  • Enclosures
    • Sound attenuated level 2 enclosure
  • Mounting Options
    • Electronic governor
    • Silencer installation kit
    • Industrial silencer removal
    • Battery removal
    • Residential silencer
  • Fuel Systems
    • Low fuel level alarm
    • Compact skidbase for open sets
    • DEFRA bunded fuel tank
    • Open set narrow tankbase
    • Low fuel level shutdown
    • Skidbase for CALG enclosure sets
    • High fuel level alarm
  • Test Reports
    • PGS Test report @ 1.0 power factor
    • PGS Test report @ 0.8 power factor
  • General
    • Stone guards/radiator trans flange
  • Global Certifications
    • Certification for CIS
  • Power Termination
    • Circuit breaker, IEC, 4 pole
  • Accessories / Miscellaneous
    • Packing case - compact set
    • Packing case - canopied set

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.