Black banner

Engine

Net Power

21HP

Engine Model

C1.1

Bore

3in

Emissions

Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Note

Net power is tested per ISO 9249:2007 and 80/1269/EEC.

Note (2)

Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.

Note (1)

Engine power is tested per ISO 14396:2002.

Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC

21HP

Gross Power - SAE J1995:2014

21.6HP

Displacement

69in³

Stroke

3.2in

Weights

Operating Weight

3913lb

Note (1)

*Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank.

Maximum Operating Weight with Canopy**

3913lb

Note (2)

**Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.

EU: CE Plate Weight***

3836lb

Note (3)

***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.

Minimum Operating Weight with Canopy*

3483lb

Dimensions - Long Stick

Dig Depth

100in

Boom Height - Shipping Position

40.9in

Maximum Reach

155.9in

Maximum Dig Height

137.4in

Note

*Overall Shipping Length depends on blade position during shipment.

Tail Swing

32.3in

O/A Undercarriage Length

57.5in

Track Width - Expanded

51.18in

Boom In Reach

57.1in

O/A Shipping Height

90.9in

Maximum Blade Depth

10.2in

Maximum Reach - Ground Level

153.1in

Overall Shipping Length*

141.3in

Maximum Dump Clearance

98.8in

Swing Bearing - Height

17.5in

Minimum Ground Clearance Below Undercarriage

6.1in

Boom Swing - Left

65°

Vertical Wall

74.4in

Track Width - Retracted

39in

Track Belt/Shoe Width

9.1in

Boom Swing - Right

50°

Maximum Blade Height

10.8in

Stick Length

45.7in

Blade

Height

8.9in

Note

*Expanded – 1300 mm (51 in)

Width*

39in

Dimensions - Standard Stick

Boom Swing - Left

65°

Maximum Reach

149.6in

O/A Shipping Height

90.9in

Maximum Blade Depth

10.2in

Minimum Ground Clearance Below Undercarriage

6.1in

Vertical Wall

70.9in

Dig Depth

92.1in

Track Width - Expanded

51.18in

Track Belt/Shoe Width

9.1in

Stick Length

37.8in

Maximum Dig Height

135in

Overall Shipping Length*

142.5in

Boom In Reach

57.5in

Maximum Blade Height

10.8in

Maximum Dump Clearance

96.5in

Boom Swing - Right

50°

Note

*Overall Shipping Length depends on blade position during shipment.

Boom Height - Shipping Position

42.9in

Tail Swing

32.3in

Track Width - Retracted

39in

Swing Bearing - Height

17.5in

O/A Undercarriage Length

57.5in

Maximum Reach - Ground Level

146.9in

Hydraulic System

Operating Pressure - Swing

1493.9psi

Digging Force - Stick - Standard

1843.4lbf

Auxiliary Circuit - Primary - Flow

8.7gal/min

Auxiliary Circuit - Secondary - Pressure

3089.3psi

Operating Pressure - Travel

3089.3psi

Operating Pressure - Equipment

3089.3psi

Auxiliary Circuit - Secondary - Flow

3.7gal/min

Digging Force - Bucket

3169.8lbf

Auxiliary Circuit - Primary - Pressure

3089.3psi

Type

Load Sensing Hydraulics with Variable Displacement Piston Pump

Pump Flow at 2,400 rpm

17.4gal/min

Digging Force - Stick - Long

1616.4lbf

Sound

Average Exterior Sound Pressure (ISO 6395:2008)

93dB(A)

Note

European Union Directive “2000/14/EC”

Travel System

Ground Pressure - Minimum Weight

4psi

Ground Pressure - Maximum Weight

4.4psi

Travel Speed - High

2.7mile/h

Travel Speed - Low

1.8mile/h

Maximum Traction Force - Low Speed

3597lbf

Gradeability - Maximum

30 degrees

Maximum Traction Force - High Speed

2315.5lbf

Service Refill Capacities

Cooling System

1gal (US)

Engine Oil

1.2gal (US)

Hydraulic System

6.9gal (US)

Hydraulic Tank

4.8gal (US)

Fuel Tank

5.8gal (US)

Swing System

Machine Swing Speed

9.8r/min

Weight Increase from Minimum Configuration

Long Stick

18lb

Steel Tracks

126lb

Expandable Undercarriage

284lb

Certification - Canopy

Tip Over Protective Structure (TOPS)

ISO 12117:1997

Top Guard

ISO 10262:1998 (Level I)

Roll Over Protective Structure (ROPS)

ISO 12117-2:2008

Standard Equipment:

  • Engine
    • Cat C1.1 Engine (U.S. EPA Tier 4 Final/EU Stage V)
    • Automatic Engine Idle
    • Automatic Engine Shutdown
    • Automatic Two Speed Travel
    • Fuel Water Separator
    • Power on Demand (not available in all regions)
    • Variable Displacement Piston Pump
    • Load Sensing/Flow Sharing Hydraulics
  • Hydraulics
    • Smart Tech Electronic Pump
    • Accumulator
    • Automatic Swing Brake
    • Auxiliary Hydraulic Lines
    • One and Two Way Auxiliary Flow
    • Continuous Auxiliary Flow
    • Auxiliary Line Quick Disconnects
  • Operator Environment
    • Tilt-up Canopy
    • Top Guard ISO 10262:1998 Level I
    • ROPS – ISO 12117-2:2008
    • TOPS – ISO 12117:1997
    • Machine 2-Point Lifting
    • Stick Steer Mode
    • Travel Cruise Control
    • Control Pattern Changer (optional in some regions)
    • Adjustable Wrist Rests
    • Washable Floor Mat
    • Travel Pedals and Hand Levers
    • Machine Security
    • Machine Security – Standard Key with Pass Code
    • Vinyl Non-Suspension Seat
    • Hydraulic Lockout – All Controls
    • Retractable High Visibility Seat Belt (75 mm/3 in)
    • Coat Hook
    • Cup Holder
    • Storage Pocket
    • Skylight
    • Mounting Bosses for Front
    • Signaling/Warning Horn
    • Boom Light, Halogen
    • Utility Space for Mobile Phone
    • Next Generation Color LCD Monitor (IP66)
      – Fuel Level and Coolant Temperature Gauges
      – Maintenance and Machine Monitoring
      – Performance and Machine Adjustments
      – Numeric Security Code
      – Multiple Languages
      – Hour Meter with Wake Up Switch
  • Undercarriage
    • Expandable Undercarriage
    • Rubber Belt (230 mm/9 in wide)
    • Dozer Blade
    • Dozer Blade Float
    • Hydraulic Track Adjusters
    • Tie Downs on Track Frame
  • Boom, Stick And Linkages
    • One Piece Boom (1780 mm/70 in)
    • Standard Stick (960 mm/37.8 in)
    • Front Shovel Capable
    • Front Shovel Capable – Pin-On
    • Thumb Ready (not available in all regions)
    • Certified Lifting Eye (optional in some regions)
  • Electrical
    • 12 Volt Battery
    • Software (machine and monitor)
    • Maintenance Free Battery
    • Signaling/Warning Horn
    • 12 Volt Power Socket

Optional Equipment:

  • Operator Environment
    • Control Pattern Changer (optional in some regions)
    • No Travel Pedals and Hand Levers
    • Machine Security – Push to Start with Key Fob/Pass Code
    • Vinyl Suspension Seat
    • LED Front Lights
    • LED Front and Rear Lights
    • LED Boom Light
    • Mirrors Left and Right
  • Undercarriage
    • Steel Track (230 mm/9 in wide)
  • Boom, Stick And Linkages
    • Long Stick (1160 mm/45.7 in)
    • Front Shovel Capable – Dual Lock Manual Coupler
    • Attachments including Couplers, Thumbs, Buckets, Augers and Hammers
    • 2nd Auxiliary Hydraulic Lines
    • Boom Lowering Check Valve
    • Stick Lowering Check Valve
    • Hydraulic Quick Coupler Lines (not available in all regions)
  • Electrical
    • Battery Disconnect
    • Product Link PL243 (regulations apply)
    • Product Link PLE643 (regulations apply)
    • Travel Alarm (standard in some regions)
  • Guarding
    • Guard, Canopy
    • Guard, Mesh
  • Other
    • Bio Oil Capable
    • Eco Drain
    • Water Jacket Heater

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.