Black banner

3512C (HD) Land Mechanical Drilling Engine

3512C (HD) Land Mechanical Drilling Engine

Cat 3512C (HD) engines set the standard in the drilling industry. For many years the 3500 has been the preferred choice by drillers due to their high performance, durability, and reliability in the oilfield while maintaining low emissions.The ideal application for the 3512C (HD) engine is mechanical drive for land drilling rigs. 3512C (HD) engines, with ratings: 932-1100 bkW (1250-1475 bhp) @ 1200 rpm meet U.S. EPA Non-road Tier 2 equivalent and CARB Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

Engine Specifications

Maximum Rating

1475BHP

Emissions

U.S. EPA Non-road Tier 2

Displacement

3574in³

Minimum Rating

1250BHP

Bore

6.69in

Stroke

8.46in

Rated Speed

1200r/min

Aspiration

Turbocharged-Aftercooled

Governor and Protection

ADEM A3

Engine Weight - Net Dry

11945lb

Rotation from Flywheel End

Counterclockwise

Oil Change Interval

500

Flywheel and Flywheel Housing

SAE No. 00

Flywheel Teeth

183

Capacity for Liquids

Minimum Cooling System - Engine Only

41gal (US)

Dimensions

Length

105.6in

Width

70.5in

Height

79.5in

Standard Equipment:

  • Air Inlet System
    • Separate circuit aftercooler core — corrosion resistant coated (airside), air cleaner (single element w/service indicator)
    • Dual rear-mounted turbochargers
  • Control System
    • ADEM A3 ECU — LH
    • Electronic fuel injector fuel system (10 amp DC power required todrive electronic engine control unit)
  • Cooling System
    • Torque converter connections
    • Thermostats and housing, jacket water pump, gear-drivencentrifugal
    • Connections for radiator cooling
    • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
    • Separate Circuit Aftercooler (SCAC)
  • Exhaust System
    • Exhaust manifold — dry, stainless steel bellows
    • Dual turbochargers with watercooled bearings
    • Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP,376 mm bolt hole dia.
  • Flywheels And Flywheel Housing
    • Flywheel, SAE No. 0 — 151 teeth
    • Flywheel housing — SAE No. 0
  • Fuel System
    • Primary fuel filter
    • Fuel priming pump
    • Fuel filter — RH spin-on type
    • Fuel transfer pump
    • Electronically controlled unit injectors
  • Instrumentation
    • Electronic instrument panel
    • Instrumentation readouts:
  • Lube System
    • Crankcase breather — top-mounted
    • Oil cooler
    • Oil filler and dipstick — RH
    • Oil pump
    • Oil filter — RH spin-on type
    • Rear sump oil pan, 250-hour change interval
    • Oil pan drain valve — 3/4" NPT female connection
  • Mounting System
    • Rails — mounting, floor type
  • Power Take-offs
    • Front housing — two-sided
  • Protection System
    • ADEM A3 ECU system to provide customer-programmableengine deration strategies to protect against adverse operatingconditions
    • Emergency stop logic inputs provided at 40-pin customer interfaceconnection
    • Air inlet shutoff
  • Starting System
    • Air starting motor — RH, 620 to 1034 kPa (90 to 150 psi)
    • Air silencer
  • General
    • Paint — Cat yellow
    • Vibration damper and guard
    • Lifting eyes
    • B-Series LAND

Optional Equipment:

  • Air Inlet System
    • Air cleaner and air cleaner mounting
    • Remote air inlet adapters
    • Air inlet heater
  • Charging System
    • Battery chargers
    • Charging alternators
  • Control System
    • Local speed throttle control
    • Throttle position sensors
    • Load sharing modules
    • Governor conversion
  • Cooling System
    • High gloss black folded core radiators
    • Coolant regulator conversion
    • Belt guard and radiator guard
    • Blower fan
    • Radiator cover
    • Fan drive and fan pulleys
    • Water level switch gauge
    • Coolant level sensors
    • Coolant conditioner
    • Expansion tank
    • Heat exchanger cooling conversion
    • Auxiliary water pump
    • Air separator
  • Exhaust System
    • Flexible exhaust fitting
    • Elbows and flange
    • Flange and exhaust adapters
    • Manifold and mufflers
  • Fuel Systems
    • Flexible fuel lines
    • Fuel cooler
    • Water/fuel separator
    • Fuel level switch
  • Instrumentation
    • Customer management device
    • Remote panel display and remote cylinder temperature display
    • Switches and contactors
    • Gauges and instrument panels
  • Lube System
    • Fumes disposal
    • Oil pans
    • Prelube options
    • Sump pumps
    • Oil Filters
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Front housing
    • Flexible couplings
    • Coupling hub
    • Front accessory drives
    • Auxiliary drive shaft
    • Auxiliary drive pulleys
    • Front stub shaft
    • Damper guard removal
    • Pulleys
    • Flywheel stub shaft
  • Protection System
    • Shutoffs
    • Switches and contractors
    • Explosion relief valve
    • Sensors
    • Oil pressure monitor
    • Shutoff controls
    • Corrosion protection
  • Starting System
    • Air starting motors — electric
    • Air pressure regulator
    • Air silencer
    • Air start controls — manual, electric
    • Redundant start
    • Starting aids
    • Battery sets – 24V
    • Battery cable and battery rack

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.