Black banner

265 Compact Track Loader

265 Compact Track Loader

The Cat® 265 Compact Track Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard torsion suspension undercarriage system provides superior traction, flotation, stability, and speed to work in a wide range of applications and underfoot conditions

Engine

Gross Power - SAE J1995:2014

74hp

Engine Model

Cat® C2.8TA (turbo after-cooled)

Net Power - ISO 9249

73hp

Net Power - SAE 1349

74hp

Peak Torque at 1,360 rpm SAE J1995

280lb/ft

Displacement

171in²

Stroke

4.3in

Bore

3.5in

Operating Specifications

Rated Operating Capacities - 35% Tipping Load

2823lb

Rated Operating Capacities - 50% Tipping Load

4033lb

Rated Operating Capacity with Optional Counterweight - 35% Tipping Load

1343kg

Tipping Load

8066lb

Breakout Force - Lift Cylinder

6739lb

Breakout Force - Tilt Cylinder

8680lb

Ground Contact Area - With 450 mm/17.7 in Track

2512in²

Ground Pressure - With 450 mm/17.7 in Track

4.2psi

Weights*

Operating Weight

10492lb

Counterweight Adds to Operating Weight

276lb

Enclosed Cab Adds to Operating Weight

181lb

Note

*Operating Weight, Operating Specifications, and Dimensions are based on 2036 mm (80") low profile bucket with bolt on cutting edge, 450 mm (17.7") wide track, 75 kg (165 lb) operator, open canopy, mechanical suspension seat, HD battery with disconnect, s

Dimensions

Bucket Pin Height - Carry Position

8.4in

Bucket Pin Height - Maximum Lift

132in

Bucket Pin Reach - Maximum Lift

9.8in

Clearance at Maximum Lift and Dump

104.5in

Departure Angle

28.2°

Ground Clearance

8.5in

Height - Top of Cab

83.3in

Length - Track on Ground

64in

Length - With Bucket on Ground

140.9in

Length - Without Bucket

116.1in

Maximum Overall Height

164.3in

Maximum Reach - With Arms Parallel to Ground

46.7in

Overall Length - Track

83.7in

Rack Back Angle - Maximum Height

85.3°

Reach at Maximum Lift/Dump

25.1in

Roll Back Angle

27°

Turning Radius from Center - Bucket (racked)

87.8in

Turning Radius from Center - Coupler

56.5in

Turning Radius from Center - Machine Rear

68.5in

Vehicle Width (450 mm/17.7 in tracks)

75.8in

Maximum Dump Angle

46.4°

Cab

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level I

FOPS Level II

ISO 3449:2005 Level II (optional)

Service Refill Capacities

Cooling System

2.8gal (US)

Engine Crankcase

2.1gal (US)

Fuel Tank

31.9gal (US)

Hydraulic System

9.7gal (US)

Hydraulic Tank

6.9gal (US)

Power Train

Travel Speed - Forward or Reverse - One Speed

5mile/h

Travel Speed - Forward or Reverse - Two Speed

8.1mile/h

Hydraulic System

Hydraulic Flow - Standard - Loader Hydraulic Pressure

3500psi

Hydraulic Flow - Standard - Loader Hydraulic Flow

23gpm

Hydraulic Flow - Standard - Hydraulic Power (Calculated)

46.4hp

Hydraulic Flow - High Flow - Loader Hydraulic Pressure

3500psi

Hydraulic Flow - High Flow - Loader Hydraulic Flow

30gpm

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)

60.9hp

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure

4061psi

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow

34gpm

Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)

80.7hp

Noise Level

Inside Cab*

80dB(A)

Outside Cab**

103dB(A)

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (2)

*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee

Note (3)

**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Sustainability

Recyclability

95%

Standard Equipment:

  • Standard Equipment
    • Quick Coupler: Manual or Hydraulic
    • High Visibility Seat Belt: 50 mm (2 in), 75 mm (3 in), or 3-point lap/shoulder
    • Steel Imbed Rubber Track – 450 mm (17.7 in) bar tread, 450 mm (17.7 in) block tread
    • Dual Flange Front Idler/Single Flange Rear Idler or Triple Flange Front/Rear Idlers
  • Performance Packages
    • Performance Package HP1: Standard Flow Hydraulics
    • Performance Package HP3: High Flow XPS Hydraulics
  • Comfort Packages
    • Open canopy: Cup Holder, Cell Phone Pocket, choice of vinyl Seat (Mechanical Suspension, High Back/Heated/Air Ride Seat)
    • Enclosed Cab with heat and air conditioning: Side Windows, Cup Holder, Cell Phone Pocket, choice of Seat (Mechanical Suspension, High Back/Heated Air Ride Seat, High Back/Ventilated and Heated Air Ride Seat) and Door choice (Glass or Polycarbonate)
  • Technology Packages
    • T2 – Standard Display, Standard Joysticks, traditional Key Start switch, and Rear-view camera.
    • T4 – Advanced Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera.
    • T5 – T4 + 2 additional side view cameras.
  • Radio
    • Radio, none – for open canopy machines and countries not certified for Bluetooth® technology
    • Integrated AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
    • Integrated DAB+/AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
  • Product Link
    • Product Link Basic series PL243
    • Product Link Elite series PLE643
  • Cooling Fan
    • On-demand, variable speed hydraulic cooling fan
    • On-demand, variable speed hydraulic cooling fan, with automatic and manual purge reversing operation
  • Guarding And Sealing Packages
    • HD0 – base guarding and sealing (engine air inlet rain cap, front cab to-frame sealing, and hydraulic fill access door)
    • HD1– intermediate guarding and sealing† (HD0 + cab-to-frame side sealing, lockable fuel fill access door, tilt cylinder guarding, and drive line bottom guarding.) †Some equipment varies by region.
    • HD2 – most comprehensive guarding and sealing† (HD1 + turbo guard, exhaust stack wrap, DPF wrap, quick disconnect guarding, fully enclosed drive line guarding, under step hydraulic lines guard cover, engine air inlet pre-cleaner.)
  • Electrical
    • Work Tool Electrical Harness
    • Heavy duty battery
    • Battery disconnect with lockout feature
    • 12-volt Electrical System
    • 85 Ampere Alternator
    • LED Work Lights
    • Auto Reverse Lights
    • Switch Backlighting
    • Interior LED Dome Light
    • Backup Alarm
    • Electrical Outlet, Beacon
    • Exterior Courtesy Lighting
    • Automatic Work light notification flash when parking brake is released
  • Operator Environment
    • Full color LCD monitor: Creep speed control, Drive response adjustment, Implement response adjustment, Drive Power Priority adjustment, Language selection (× 32), Multi-operator Anti-theft Security System and Monitoring, Maintenance schedule and reminders, Event and Diagnostic Code monitoring, Date /Time/Units/Brightness settings, and Smart Technology for use with Smart Attachments.
    • Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Supply Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System (where applicable)
    • Gauges: Fuel Level, Hour Meter, Hydraulic Temperature, Hour Meter, Battery Voltage, Tachometer
    • Fold In Ergonomic Contoured Armrest
    • Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking
    • Brake Engages
    • ROPS Cab, Tilt Up
    • FOPS, Level I
    • Top and Rear Windows
    • Floor Mat
    • Headliner
    • Interior Rearview Mirror
    • Horn
    • Hand (Dial) Throttle, Electronic
    • Seat Mounted Joystick Controls
    • Cell Phone Storage Pocket
    • Cup Holder
    • 12-volt power port
    • Foot Throttle
  • Hydraulics
    • Selectable control pattern – ISO or H
    • Electro/hydraulic implement control
    • Electro/hydraulic hydrostatic transmission control
    • Speed sensor guarding
    • Heavy duty flat faced quick disconnects with integrated pressure release lever
    • Hydraulic oil level sight gauge
  • Power Train
    • Cat C2.8TA turbocharged, after-cooled diesel engine, meeting Tier 4 Final and Stage V Emission Standards: Glow plugs starting aid Liquid cooled, direct injection
    • Extended life antifreeze (–37° C, –34° F)
    • Air cleaner, dual element, radial seal
    • Scheduled Oil Sampling (S·O·SSM) Valve, Hydraulic Oil
    • Ecology drain – coolant
    • Radiator coolant level sight gauge
    • Radiator expansion bottle
    • Filter, hydraulic supply, cartridge type
    • Filter, hydraulic return, cartridge type
    • Filter, canister type, engine oil
    • Filter, canister type, fuel and water separator
    • Radiator/hydraulic oil
    • Cooler (side-by-side)
    • Spring applied, hydraulically released, parking brakes
    • Hydrostatic transmission
    • Lockable fuel cap
    • Hydraulic demand cooling fan
    • Auto engine idle
  • Undercarriage
    • Torsion Suspension (4 independent torsion axles)
    • Two speed travel
    • Integrated tie downs on track frame (4)
  • Frame
    • Machine tie down points (9)
    • Removable panels for machine frame cleanout
    • Support, lift arm
    • Steel rear and front bumpers, welded
    • Fuel fill, machine right hand side
  • Other
    • Auxiliary Hydraulics, Continuous Flow
    • Telematics, Product Link, Cellular
    • Steel engine door with replaceable louvers
    • Engine door – lockable
    • Work tool attachment coupler
    • Cat ToughGuardTM hose

Optional Equipment:

  • Optional Equipment
    • External Counterweights
    • Beacon, LED
    • Engine Block Heater – 120V
    • Oil, Hydraulic, Cold Operation
    • 4-point machine lifting eyes
    • Paint, Custom
    • Speed Sensitive Ride Control
    • Bluetooth Key Security
    • Attachment Hose Guide
    • Corrosion Inhibitor Coating

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    icon-angle icon-bars icon-times