Black banner

G3304B Gas Compression Engine

G3304B Gas Compression Engine

Tough and durable, built on the industry-standard G3300 platform and equipped with technology that brings performance, uptime, and low operating cost to your operation. G3304B engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for G3304B engines include gas lift, gas gathering, and wellhead gas compression. Cat G3304B gas engine. Ratings: 71 bkW (95 bhp) @ 1800 rpm are NSPS site compliant capable with Caterpillar or customer-provided air-fuel ratio control and aftertreatment.

Engine Specifications

Maximum Rating

95BHP

Emissions

NSPS 2010

Displacement

427in³

Minimum Rating

95BHP

Compression Ratio

10.5:1

Aspiration

Naturally Aspirated

Rotation from Flywheel End

Counterclockwise

Flywheel and Flywheel Housing

SAE No. 1

Flywheel Teeth

156

Weight - Dry

2253.8lb

Oil Change Interval

750

Ignition, Protection

ADEM™ A4

Air/Fuel Ratio Control

ADEM™ A4

Stroke

6in

Bore

4.8in

Capacity for Liquids

Cooling System

4.23gal (US)

Lube Oil System - Refill

8.19gal (US)

Standard Equipment:

  • Air Inlet System
    • Air cleaner — intermediate duty, dry
    • Air cleaner rain cap (shipped loose)
    • Service indicator
  • Control System
    • ADEM A4
  • Cooling System
    • Thermostats and housing — full open temperature 97°C (207°F)
    • Jacket water pump — gear-driven, centrifugal, non-self-priming
  • Exhaust System
    • Exhaust manifolds — watercooled
    • Exhaust elbow — dry 102 mm (4 in)
    • Three-way catalyst — 1.0 g and 0.5 g NOx catalyst options
  • Flywheels & Flywheel Housings
    • Flywheel, SAE No. 1
    • Flywheel housing, SAE No. 1
    • SAE standard rotation
  • Fuel System
    • Air/fuel ratio control
    • Gas pressure regulator
    • Requires 10.3-68.9 kPa (1.5-10 psi) gas
    • Natural gas carburetor
  • Ignition System
    • ADEM A4 ignition
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filter
    • Oil pan, full sump
    • Oil filler and dipstick
  • Protection System
    • The following parameters include alarm and shutdown

Optional Equipment:

  • Charging Alternator
    • 24V, 35A alternator
    • 24V, 35A CSA alternator*
  • Cooling System
    • Radiators
    • Jacket water pump inlet adapter
  • Exhaust System
    • Exhaust flex fitting — ANSI flange
    • Exhaust elbow
    • Catalyst harness
    • ANSI flange
  • Ignition System
    • CSA certified electronics and ignition*
  • Instrumentation
    • Operator interface panel
    • Operator interface panel enclosure
    • 15', 25' and 50' interconnect harness
  • Starting System
    • Air pressure regulator
    • Air start silencer
    • Vane starter
    • Electric starter
    • Turbine starter

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.