Black banner

C175-16 Offshore Generator Set

C175-16 Offshore Generator Set

Caterpillar can help you navigate the challenges in the oil and gas industry, including global competition, tightening emission standards, and high productivity demands. The Cat® C175 delivers more reliable power in less space than any other generator set in its class. As efficient as it is powerful, this compact package will make a huge impact on your rig’s performance. The proven success of the 3500 series engines forms the foundation of the Cat C175 diesel engine. Low owning and operating costs, high endurance components, and outstanding serviceability add to the innovations. The Cat Alarm and Protection System integrates with dual ADEM A4 engine control modules to provide redundant engine control, generator set protection, and a simple operator interface. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C175-16 offshore generator set. Ratings: 1833-2660 ekW (2619-3325 kVA) @ 50/60 Hz (1500/1200/1800 rpm). U.S. EPA Marine Tier 2 certified and IMO Tier II emissions compliant.

Engine Specifications

Minimum Rating

2619kV·A

Maximum Rating

3325kV·A

Emissions

Available in IMO Tier II/ EPA Marine Tier 2 configurations

Stroke

8.66in

Weight

53599lb

Oil Change Interval

1000h

Fuel System

Common Rail/EUI™

Engine Control

Dual ADEM™ A4

Generator Set Control

MPD 3.0 / Cat® Alarm and Protection System

Bore

6.89in

Displacement

5167in³

Aspiration

Turbocharged/2-stage aftercooled

Speed

1200/1500/1800 rpm

Dimensions

Height

50 Hz - 2928 (115 in) / 60 Hz - 2916 mm ( 115 in)

Width

50 Hz - 2413 mm (95 in) / 60 Hz - 2125 mm (84 in)

Length

50 Hz - 6782 mm (267 in) / 60 Hz - 6742 mm (265 in)

Capacity for Liquids

Cooling System - Engine

92gal (US)

Lube Oil System - Refill

250gal (US)

Standard Equipment:

  • Air Inlet System
    • Dual turbochargers
    • Corrosion-resistant aftercooler core
    • Air cleaners — single or dual element
  • Exhaust System
    • Dry exhaust manifolds with thermo-laminated heat shields
    • Dual turbochargers with water-cooled bearings and thermo-laminated heat shields
    • Vertical exhaust outlet
    • Flange and exhaust expanders
  • Cooling System
    • Separate-circuit-aftercooler (SCAC) and jacket water (JW) circuit cooling system
    • Gear-driven centrifugal pumps, one for each circuit
    • SCAC electronic thermostat, outlet-controlled with aftercooler inlet temperature sensing
    • JW electronic thermostat, outlet-controlled with outlet temperature sensing
    • Engine oil cooler in JW circuit
  • Fuel System
    • Cat common rail high-pressure fuel system with electronically controlled unit injectors
    • Duplex primary fuel filter with water separator
    • Duplex secondary/tertiary fuel filters
    • Electric fuel priming pump
    • Gear-driven low pressure transfer pump
    • Gear-driven high pressure transfer pump
    • Double-walled high pressure fuel lines
    • Fuel pressure, temperature, and leak detection sensors
  • Lubrication System
    • Engine-driven, gear-type oil pump
    • Integral lube oil cooler
    • Front-mounted oil drain lines and valve
    • Oil sampling valve
    • Filler and dipstick
    • Four-canister simplex oil filter
    • Prelube pump — electric, air, or custom
    • Fumes disposal with crankcase breathers
    • Crankcase explosion relief valves
  • Engine Control And Protection
    • Dual ADEM A4 engine control unit (ECU) for redundancy
    • Software monitors engine parameters and performs alarm, derate, and shutdown functions
    • Rigid wiring harness
    • Marine Power Display 3.0 (MPD 3.0)
  • Mounting
    • Inner-outer base with vibration isolators
  • Generator
    • Kato brushless permanent magnet 6P6.6-3200 HR
    • 2-bearing, close-coupled arrangement
    • 60 Hz, 600V, 0.7 PF
    • UL/CSA listed, IP23
  • Flywheel And Coupling
    • Flywheel housing, SAE No. 00
    • Flywheel, SAE No. 00
    • ABS certified, non-certified, or custom-coupling and coupling mounting
    • Free-standing or close-coupled generator set arrangements
  • Starting System
    • Turbine air starter or
    • Dual electric starting motors or
    • Air and electric starting motors (redundant)
  • General
    • Power distribution box — 24V or custom
    • 20A battery charger
    • Cat yellow paint
    • Offshore oil field sub-base
    • Integral spring isolators with limit stop
    • Lift provisions on base
    • Oil drain extension
    • Engine length drip pan with drain
    • Torsional dampened driveline couplings

Optional Equipment:

  • Air Inlet System
    • Air cleaner service indicator
  • Cooling System
    • 9 kW, 240V, 60 hz jacket water heater
    • Custom jacket water heater
  • Fuel System
    • Four canister duplex oil filter
  • Engine Control And Protection
    • Cat Alarm and Protection System
    • Communication module PL1000T/E
    • Direct-rack control
    • Thermocouples
    • Metal particle detector
    • SOLAS spray shielding
  • Mounting
    • Custom I-beam base with vibration isolators
  • Generator
    • Custom generator
  • General
    • TVA report
    • Special tests
    • Project-specific installation drawings
    • P&ID-electrical drawings
    • Spare parts kit
    • Barring group
    • Engine lifting group
    • Custom generators and radiators

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.