Black banner

ATC-300+ CONTROLLER

The ATC-300+ is a comprehensive and multifunctional microprocessor-based ATS controller. It is a compact and self-contained panel-mounted device that is designed to replace traditional relay and solid-state logic panels. The ATC-300+ Controller provides programmed flexibility to address the needs of any system. It operates from all system voltages between 120 to 600V, single-phase and three-phase at 50 or 60 Hz. In addition, a period of no control power is provided. The controller monitors the condition of the three-phase line-to-line voltage and frequency of Source 1 and Source 2 power sources and can be programmed for single-phase operation. The ATC-300+ Controller provides the intelligence to ensure that the ATS operates properly through a series of programmed sensing and timing functions.

Technical Summary

Rating Range

120 to 600V, single phase and three phase @ 50/60 Hz

Transfer Type

Switch application dependent

Switch Type

Switch application dependent

ATC Controller Specifications

Input Control Voltage

65 to 145 Vac 50/60 hZ

Voltage Measurements of Utility

Source 1 VAB Source 2 VAB
Source 1 VAC Source 2 VBC
Source 1 VCA Source 2 VCA

Voltage Measurement Range

0 to 790 VAC rms (50/60 Hz)

Voltage Measurement Accuracy

+/-2% of nominal input voltage

Frequency Measurements Of

Source 1 and Source 2

Frequency Measurement Range

40 Hz to 70 Hz

Frequency Measurement Accuracy

+/- 0.1 Hz

Undervoltage Dropout

50% to 90% of nominal voltage

Undervoltage Pickup

(Dropout +2%) to 99% of the nominal system voltage

Underfrequency Dropout Range

90 to 97% of the nominal system frequency

Underfrequency Pickup Range

(Dropout +1 Hz) to 99% of the nominal system frequency

Overfrequency Dropout Range

103 to 110% of the nominal system frequency

Overfrequency Pickup Range

101% to (dropout - 1 Hz) of the nominal system frequency

Operating Temperature Range

-20 to 70 degree C (-4 to +158 degree F)

Storage Temperature Range

-30 to 85 degree C (-22 to +185 degree F)

Operating Humidity

0 to 95% relative humidity (noncondensing)

Operating Environment

Resistant to ammonia, methane, nitrogen,hydrogen and hydrocarbons

Generator Start Relay

5A, 1/6 hp @ 250 Vac Vac 5A @ 30 Vdc with a 150W maximum load

K1, K2 Relays


10A, 1-3 hp @ 250 Vac

10A@30 Vdc

Applicable Testing

UL-recognized component
Meets intent of UL 991 & UL 1008
Meets IEC 1000-4-2, 1000-4-3, 1000-4-4

Applicable Testing Continued

1000-4-5, 1000-4-6, 1000-4-11
CISPR 11, Class A
FCC Part 15, Class A
CSS 22.2-178

Enclosure Compatibility

NEMA 1, NEMA 3R and NEMA 12
UV-resistant ATC-300+ faceplate

Standard Equipment:

Optional Equipment:

Contact Us

Get A Quote

Thank you for your interest in Mustang Cat. We are here to help you in any way that we can. If you have a question, need equipment advice or just need additional information, we want to hear from you. You can email, phone or fill out the form below and we will be happy to connect with you.

    true I agree to all the terms and conditions

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.